Config sync/Device Groups

Here are the details of the configuration. Let me know if more detail is needed.

***vCMP host 1

Interface 1.1 hooked into datacenter switch. Setup as trunk with VLANs Interface 1.4 hooked directly into vCMP host 2 interface 1.4 via crossover cable. HA VLAN setup as untagged going to 1.4 interface. All other internal VLANs(201,201,203) setup as tagged going to internal trunk hooked up to interface 1.1 Created Guest 1 on vCMP host 1. HA VLAN and other internal VLANs on list for Guest 1.

***vCMP host 2

Interface 1.1 hooked into datacenter switch. Setup as trunk with VLANs Interface 1.4 hooked directly into vCMP host 1 interface 1.4 via crossover cable. HA VLAN setup as untagged going to 1.4 interface. All other internal VLANs(201,201,203) setup as tagged going to internal trunk hooked up to interface 1.1 Created Guest 1 on vCMP host 2. HA VLAN and other internal VLANs on list for Guest 1.

***Guest 1 on vCMP host 1(hostname: dev01, management IP 10.1.1.36)

ConfigSync config set to use 192.168.11.100 Network Failover Unicast Address set to use 192.168.11.100 Primary Local Mirror Address set to use 192.168.11.100

Added Guest1 from vCMP host2(hostname: dev02) using management IP(10.1.1.37) to Peer list. Peer list retrieved proper info from Guest1 on vCMP host2.

Created Device Group List named test-device-group. Group type: Sync-Failover Added both members, dev01 and dev02 to list

Clicked on Device management, overview. test-device-group says awaiting Initial Sync with 2 devices. dev01 has blue ball saying awaiting initial sync dev02 has red ball saying disconnected

***Guest 1 on vCMP host 2(hostname: dev02, management IP 10.1.1.37)

ConfigSync config set to use 192.168.11.101 Network Failover Unicast Address set to use 192.168.11.101 Primary Local Mirror Address set to use 192.168.11.101

Checked Peer list on Guest1 from vCMP host2(hostname: dev02). I see dev01 in list.

No Device Group List setup on dev02

Clicked on Device management, overview. No Device Groups listed on dev02