Forum Discussion

manc_63343's avatar
manc_63343
Icon for Nimbostratus rankNimbostratus
Apr 30, 2010

Can LTM be used to configure Active and Passive Servers?

For a given vip is it possible to define pool of servers that are active and also some pool of members that passive. Basically this is what I want to do:     1. Define active pool of servers for...
config
design
james_lee_31100's avatar
james_lee_31100
Icon for Nimbostratus rankNimbostratus

Thanks Don, I am not sure why nPath in the picture, could you give an example?

 

Here is the vip configuration, no persistence. ltm virtual /Common/priv-np-int-sjambari_8441 { destination /Common/10.0.22.6:8441 ip-protocol tcp mask 255.255.255.255 pool /Common/pool-int-sjambari_8441 profiles { /Common/tcp { } } source 0.0.0.0/0 source-address-translation { type automap } translate-address enabled translate-port enabled }

 

james_lee_31100's avatar
james_lee_31100
Icon for Nimbostratus rankNimbostratus
May 15, 2015
and client is on the same subnet as those servers