Forum Discussion
Messe
Nimbostratus
NimbostratusBNA and LTM 4200v TFTP not working.
I am running BNA for configuration backup. BNA logs in, TFTPs the files back, and saves them. If we needed to restore the LTM, I can have the LTM pull the config file back down. We have this working ...
MesseNimbostratus
NimbostratusHere is the tcpdump from the 4200
[root@LB-JP-SRV1-1:Active:In Sync] config tcpdump -nni 0.0 host 161.173.59.48
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on 0.0, link-type EN10MB (Ethernet), capture size 96 bytes
15:59:02.715107 IP 10.171.58.6.46281 > 161.173.59.48.69: 28 WRQ "agent-160249.tmp" netascii
15:59:02.901345 IP 161.173.59.48.39795 > 10.171.58.6.46281: UDP, length 19
15:59:02.902001 IP 10.171.58.6 > 161.173.59.48: ICMP 10.171.58.6 udp port 46281 unreachable, length 36
15:59:07.715263 IP 10.171.58.6.46281 > 161.173.59.48.69: 28 WRQ "agent-160249.tmp" netascii
15:59:07.904240 IP 161.173.59.48.39135 > 10.171.58.6.46281: UDP, length 19
15:59:07.904962 IP 10.171.58.6 > 161.173.59.48: ICMP 10.171.58.6 udp port 46281 unreachable, length 36
15:59:12.715289 IP 10.171.58.6.46281 > 161.173.59.48.69: 28 WRQ "agent-160249.tmp" netascii
15:59:12.885430 IP 161.173.59.48.59497 > 10.171.58.6.46281: UDP, length 19
15:59:12.886446 IP 10.171.58.6 > 161.173.59.48: ICMP 10.171.58.6 udp port 46281 unreachable, length 36
15:59:17.715327 IP 10.171.58.6.46281 > 161.173.59.48.69: 28 WRQ "agent-160249.tmp" netascii
15:59:17.885188 IP 161.173.59.48.43585 > 10.171.58.6.46281: UDP, length 19
15:59:17.886054 IP 10.171.58.6 > 161.173.59.48: ICMP 10.171.58.6 udp port 46281 unreachable, length 36
15:59:22.715444 IP 10.171.58.6.46281 > 161.173.59.48.69: 28 WRQ "agent-160249.tmp" netascii
15:59:22.884091 IP 161.173.59.48.38007 > 10.171.58.6.46281: UDP, length 19
15:59:22.885389 IP 10.171.58.6 > 161.173.59.48: ICMP 10.171.58.6 udp port 46281 unreachable, length 36
Here is the tcpdump from the 3900
[root@LB-EDC-SRV2-1:Active:In Sync] config tcpdump -nni 0.0 host 10.98.11.135
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on 0.0, link-type EN10MB (Ethernet), capture size 96 bytes
17:13:05.220018 IP 172.17.40.6.42927 > 10.98.11.135.69: 28 WRQ "agent-579614.tmp" netascii
17:13:05.265878 IP 10.98.11.135.62508 > 172.17.40.6.42927: UDP, length 4
17:13:05.266956 IP 172.17.40.6.42927 > 10.98.11.135.62508: UDP, length 516
17:13:05.272177 IP 10.98.11.135.62508 > 172.17.40.6.42927: UDP, length 4
17:13:05.272878 IP 172.17.40.6.42927 > 10.98.11.135.62508: UDP, length 516
17:13:05.277888 IP 10.98.11.135.62508 > 172.17.40.6.42927: UDP, length 4
17:13:05.278880 IP 172.17.40.6.42927 > 10.98.11.135.62508: UDP, length 516
17:13:05.283374 IP 10.98.11.135.62508 > 172.17.40.6.42927: UDP, length 4
17:13:05.283887 IP 172.17.40.6.42927 > 10.98.11.135.62508: UDP, length 516
17:13:05.289118 IP 10.98.11.135.62508 > 172.17.40.6.42927: UDP, length 4
17:13:05.289865 IP 172.17.40.6.42927 > 10.98.11.135.62508: UDP, length 516
17:13:05.294381 IP 10.98.11.135.62508 > 172.17.40.6.42927: UDP, length 4
17:13:05.294843 IP 172.17.40.6.42927 > 10.98.11.135.62508: UDP, length 516
So it looks to me that the 4200 is saying that the port is not available after he said that was the port he was going to use.
What_Lies_Bene1Cirrostratus
Thanks but unless you can format the output I'm not going to be able to read it I'm afraid.If you select it all and click the 'button' with the grey strip on it's left that should do it. Cheers- MesseSorry. I have fixed it. I am new to devcentral. I was wondering how to make it look correct. Thanks for the tip.
