Forum Discussion
NimbostratusBackend Server respond with * LibreSSL SSL_read: Connection reset by peer, errno 54
NimbostratusAppreciate all your help. I am a novice in reading pcap files.
Below screenshot of the traffic
ip ending
...209 = F5
...35 = my endpoint
.6 = mobile device
per the screenshot traffic from .6 (mobile device) to .35 (endpoint) is TCP retransmission.
What do I have to look at to see what is causing this?
Apologize again if this is kind of a stupid question but I am a noob in this.
Appreciate pointing me in the right direction.
Thank you
MVPThis capture does not show any RST packet but instead it shows a weird problem: the TCP connexion is not correctly established between 192.168.83.209 (the self ip doing monitoring?) and 192.168.83.35, you have SYN, SYN-ACK but no ACK which is mandatory for the TCP 3-way handshake, could it be the problem? I can't tell with the few amount of information about your setup. But I can see few things that may be worth troubleshooting: you don't have source address translation enabled in your VS which causes the traffic not getting back from the backend, and it seems that the VS address is the same as your self IP, this later is technically possible but sometimes it may cause problems.
- pullb0x
Amine_Kadimi
OMG, it appears the source address translation resolved the issue.
Still need to do some more tests to make sure.
THANK YOU so much for your help so far.
