Forum Discussion

Stefan_Klotz_85's avatar
Stefan_Klotz_85
Icon for Cirrus rankCirrus
May 24, 2015

APM on 1600 with 10.2.4HF10 and Route Domain not showing Logon Page

We're using a LTM with APM add-on license on a BIG-IP 1600 running 10.2.4HF10. We are also using Route Domains, but without assigning it to dedicated partitions. We have a standard VS running on port...
BIG-IP Access Policy Manager (APM)
security
Stefan_Klotz's avatar
Stefan_Klotz
Icon for Cumulonimbus rankCumulonimbus
May 26, 2015

In the meanwhile I tried to re-built this setup on a VE on my laptop with the following results:

 

  • First I configured everything in Common (no RD used) -> Logon page loaded correctly
  • Then I created a RD and another VS within this RD -> issue as described above occurred again
  • Then I change the value for "Parent ID" within the RD from the default "None" to "0" -> Logon page loaded correctly

Both RDs (Common and the new created one) have no routes specified at all and all VLANs are directly connected. From what I read in the documentation this parent ID setting is only required for routing lookup, so it shouldn't matter in our setup at all. But why does it behaving differently with both options?

 

And according to our production system, is there any risk, when changing the parent ID from "None" to "0"?

 

Thank you!

 

Ciao Stefan :)