Forum Discussion
nznznznzF5_2991
Nimbostratus
NimbostratusAllow Telnet to HTTP port when HTTP profile is applied
How can I allow telnet to http port to work on a virtual server with a HTTP profile on?
Samir_Jha_52506
Noctilucent
NoctilucentTelnet only work if you have configure VIP with work(i.e 80, 443, 8080, etc). but what you wanted to achieve with this, please explain.
telnet
At the prompt, enter an appropriate HTTP request line and HTTP headers, pressing Enter once after each line.
For example:
GET / HTTP/1.1
Host: www.xyz.com
Connection: close
nznznznzF5_2991Nimbostratus
NimbostratusWhen I apply a basic http profile on a virtual server. The TCP handshake continues (because of tcp profile) but I couldn't get a banner then if I remove the http profile from the virtual server. I'm getting a banner.
We've had some issue when we turned on http profile on a virtual server for HTTP payload debugging, the ESB nodes yields network timeout despite that the packet capture indicates that they are passing a HTTP payload prior to applying the http profile.
