Forum Discussion
mshoaib
Cirrus
CirrusAdding New BigIP Units Using Free CPUs on i7800 (LB13 & LB14) to an existing HA Pair
Hello, We have a pair of i7800 devices, each running two guests with the following configuration: i7800 Unit 1: LB09 & LB11 i7800 Unit 2: LB10 & LB12 Current Setup: LB09 & LB10: These are par...
Hi mshoaib,
To my understanding i7800 supports only 12 vCPU not 14 vCPU, as per written in f5 Documentation.
Can you please check again and share the vCMP host , and number of vCPU supported, is it 12 or is it 14.
Please refer:
https://my.f5.com/manage/s/article/K14218
https://wtit.com/f5-resources/vcmp-guest-memory-cpu-core-allocation-matrix/
Please mark it as solution in case if you feel your query has been responded and saved your time and giving pointers toward resolving your issue, as it will help other to use your query scenario to solve their similar issue.
Best Regards,
F5 Design Engineer
Hi mshoaib,
To my understanding i7800 supports only 12 vCPU not 14 vCPU, as per written in f5 Documentation.
Can you please check again and share the vCMP host , and number of vCPU supported, is it 12 or is it 14.
Please refer:
https://my.f5.com/manage/s/article/K14218
https://wtit.com/f5-resources/vcmp-guest-memory-cpu-core-allocation-matrix/
Please mark it as solution in case if you feel your query has been responded and saved your time and giving pointers toward resolving your issue, as it will help other to use your query scenario to solve their similar issue.
Best Regards,
F5 Design Engineer
mshoaibCirrus
Cirrushi F5_Design_Engineer ... appreciate your response.
I reviewed the KB article, but it seems to contradict the actual device configuration. Please see the screenshot below, which shows a total of 14 CPUs.