Forum Discussion
Josiah_39459
Historic F5 Account
You just need a route. If you want the route on a tmm interface (which I assume you mean when you say connected subnet), just go to Network -> Routes and add your gateway with public IP access on that subnet as a route to the relevant /32's that newaddress.company.com resolves as.
pekka_kovesjar2
Apr 11, 2016Nimbostratus
Hi Josiah
f5 connected networks = f5 device own interfaces > IP-addresses are on those networks, tmm or mgmt. In this case I'm talking about that public facing network. For example mask is /24, default gateway is .1.1.1.1/24, f5 self-IP is .1.1.1.2/24, APM VIP is 1.1.1.3/24. and newaddress.company.com is 1.1.1.5/24. For that reason I do have route to 1.1.1.5. Address 1.1.1.5 is ADFS proxy made with Microsoft techniques. Because f5 is configured to use only internal DNS-servers (split DNS => internals answer private addresses) I did static host entry to f5 for newaddress.company.com. Tested fron CLI that f5 resolves right IP. I can also see on decodec (hex-to-text) APM URI that hostname on URI is that .newaddress.company.com. TCPDUMP -nni 0.0 host 1.1.1.5 don't show any traffic when f5 try to connect newaddress.company.com.
-Pekka-