Forum Discussion

John_Van_Zant's avatar
John_Van_Zant
Icon for Altostratus rankAltostratus
May 25, 2022

14.1.4.5 to 14.1.4.6 upgrade fails on 1 vm in HA but succeeds in the other?

Hi All,  I have an HA vm pair that is running 14.1.4.5, I am trying to upgrade it to 14.1.4.6 and one of the pair upgrades normally (I have done a few over the years) but in the second one, the upgr...
security
Nikoolayy1's avatar
Nikoolayy1
Icon for MVP rankMVP

Did you see if you can access the CLI with local or remote credentials?

 

 

Also never forget to do relicense before the upgrade:

https://community.f5.com/t5/technical-forum/knowledge-sharing-f5-software-upgrade-rma-process/td-p/291676

 

 

Issues that I had was the gui to stop me needing to do relinse from the CLI and then to reboot the device:

 

https://support.f5.com/csp/article/K2595

 

Also if you manage to get acces through CLI or console do "tmsh load sys config verify" and check if there is an error (warnings do not matter but errors do) and google the error if you see one.

John_Van_Zant's avatar
John_Van_Zant
Icon for Altostratus rankAltostratus
May 31, 2022

First off, thank you for replying.

We use tacacs+ for authentication so there isn't any local account.  I suppose I could turn tacacs off and then see if I can authenticate with a local.  I will try this and see what I will find.

 

Licensing looks good from this end (from restored snapshot).