ipv6
7 TopicsIPv6 Virtual Server to IPv4 pools translation
Hi all, we are going to configure below scenario on BIG-IP AWAF VE: Source (client from IPv6) --> Virtual Server (IPv6) --> Pool (servers in IPv4) As per below ref article BIG-IP will automatically translate as below: Connections to an IPv6 virtual server that are forwarded to an IPv4 destination will be translated to the IPv4 self IP address of the destination VLAN. Ref Article:https://my.f5.com/manage/s/article/K3326 I want the actual source IP inforamtion on physical server, what is the solution to achive it. please let me know if X-Forwarding For will solve my issue ?Solved1KViews0likes3CommentsF5 LTM SNAT: only 1 outgoing connection, multiple internal clients
I have an F5 LTM SNAT configured: ltm snat /Common/outgoing_snat_v6 { description "IPv6 SNAT translation" mirror enabled origins { ::/0 { } } snatpool /Common/outgoing_snatpool_v6 vlans { /Common/internal } vlans-enabled } ... with a translation configured as: ltm snat-translation /Common/ext_SNAT_v6 { address 2607:f160:c:301d::63 inherited-traffic-group true traffic-group /Common/traffic-group-1 } ... with snatpool configured as: ltm snatpool /Common/outgoing_snatpool_v6 { members { /Common/ext_SNAT_v6 } } ... and finally, with the SNAT type set to automap: vs_pool__snat_type { value automap } The goal is to achieve a single Diameter connection (single source IP, port) between F5 and the external element, while internally multiple Diameter clients connect via F5 to the external element: However, what ends up happening with this SNAT configuration is that multiple outgoing Diameter connections to the external Diameter element are opened, with the only difference between them being the source port (source IP, destination IP and port remained the same). The external element cannot handle multiple connections per the same origin IP and the same Diameter entity (internal clients are all configured to use the same Origin-Host during the Capabilities Exchange phase). Is there a way to configure F5 to funnel all the internal connections into a single outgoing one?Solved1KViews0likes10CommentsCreate IPv6 self-IP with Route Domains on 10.2.3
We need to create IPv6 self-IPs in a non-default Route Domain, but we are getting the following error: The vlan () for the specified self IP () must be one of the vlans in the associated route domain (0). Seems the internal F5 logic interpret this as an IP-address from Route Domain 0, although we are in a partition which is mapped to Route Domain 4 (doing this, you normally don't need to append the <%RD>). I verified this also on version 11.x and there it's not an issue. So is this a bug in version 10.2.3 or do I need to use a special format? Or isn't this kind of setup supported in such an old version? Thank you! Ciao Stefan 🙂208Views0likes2CommentsHow to check if a string parameter can be an IPv4 or an IPv6 or nothing in an iRule ?
How to deal with that question in the best optimized way to code it versus cycles ? "How to check if a string parameter can be an IPv4 or an IPv6 or nothing in an iRule ?" I have already looked at "IP::addr .... mask ...scan ..." without any simple efficient way. Some helps ? Some few lines ? or TCL function or undocumentated iRule command ? Many thanks :-)646Views0likes2CommentsReverse records (PTR) for IPv6
Hi folks, i got an F5 DNS acting as a nameserver, ready for ipv6, but now we got the create the reverse records (PTR) for the clients subnet, and those subnet are millions of millions of addreses, so millions of records, i dont know how we can solve this, with an irule i guess or maybe you guys know another method working somewhere. Thanks guys!339Views0likes1CommentNAT IPv6 to IPv6 (NAT66)
Hi, I have a scenario which requires us to do ipv6 to ipv6 natting. (map a private-ipv6 to a public-ipv6) We are using the soft version 13.1.1.4 and it seems it doesn't properly work. We tried the following: 1. cfged a snat pool list w/ one ipv6 address, next this snat was assigned to our ipv6 virtual-server. tshooting it w/ tcpdump shows no translation occurs. i found under the 14.x release notes a bug ID681070 whichseems similar "NAT66 may fail if configured with a single translation address". we then tried to cfg the snat pool list w/ an ipv6/124 prefix resultingin errors by the f5 saying " 01020059:3: IP Address :: is invalid, must not be all zeros." tried using an iRULE w/ plain when client_accepted, snat ipv6address... this didn't work either, we receiving TCL errors bad IP address format (line 1)TCL error (line 1) (line 1) invoked from within "snat xxxx:6xx0:0001:0100:00xx:0xx5:0104:0/124" Did anyone successfully configure something like this? Any ideas will be very much appreciated. thanks,528Views0likes0CommentsIs it cmpulsory to enable DNS IPv6 to IPv4 to host IPv6 listner?
Comment made 1 day ago by Mihir Joshi 2 Hi, I have a question. Is it compulsory to enable option "DNS IPv6 to IPv4" if we host IPv6 listener on BIG-IP DNS (GTM)? We are experiencing strange issue. User belong to one of the Europe region not able to connect application when they connect from their home Wi-Fi which have IPv6 addresses enabled. On GTM we have IPv6 listener and IPv4 listener which shares same DNS profile which enabled with option "DNS IPv6 to IPv4" (Secondary). Because of this end user receives two records in IPv6 addresses in format of "::xxx.xxx.xxx.xxx". Do you think this could be a reason for issue we are currently experiencing? When we ask client to change their IP schema from IPv6 to IPv4 it works perfectly fine. Regards, Mihir385Views0likes2Comments