device

5 Topics

F5 Device Certificate renewal process on Active and Standby devices
Hi Team, The SSL certificates on the load balancers we manage (both Active and Passive) are set to expire in July. Could you please share the recommended steps to renew them correctly and ensure a smooth implementation without any service impact? Certificate Expiry Details Active Load Balancer: Expires on July 26th, 2025 Passive Load Balancer: Expires on July 27th, 2025 Please note that in our case, both load balancers are using different certificates.
Mr_BK
Jul 21, 2025 Place Technical Forum
133Views
0likes
4Comments
Unable to forward COA traffic to AP via F5
I have a AP talking to Radius server via F5 and radius traffic going through but when radius server is sending a COA packet on udp 3799, it is not getting forwarded to AP. Can someone help
tkhanna82
Jun 06, 2025 Place Technical Forum
71Views
0likes
3Comments
Cannot join devices into cluster
Hello, I am trying to join two devices into a device group on 11.5.3 I did the following things; Added HB vlan aswell as other VLANs Set NTP and DNS servers Added Self IP in HB vlan (with port lockdown: allow all) Set device ConfigSync to HB self ip Set network failover addresses to HB self ip & mgmt ip Set mirroring address to HB self ip Set certificate for mgmt (during the wizard, so nothing special) Reset device trust, added other devices mgmt ip with correct credentials Ensured local device can reach the mgmt webui of the remote one (curl) Ensures local device can ping the HB self ip of the remote device netstat -pan | grep -E 6699 shows no connections Now when I look at the device group, I see 'Disconnected' for the local and the remote machine. Ideas? tmsh show net self; http://pastebin.com/raw/SsMkPcPP tmsh show net vlan; http://pastebin.com/raw/XZkUcsrr
Solved
NiHo_202842
Jun 06, 2023 Place Technical Forum
782Views
0likes
10Comments
what's Device ID in asm?
我想知道设备ID是什么以及它是由什么组成的？比如时间，源ip，源端口……实体是什么？
Solved
小白
Feb 23, 2023 Place Technical Forum
3.6KViews
0likes
12Comments
Changing Management-ip in an HA pair setup
Hello, I've read this Article: https://support.f5.com/csp/article/K62249587 but I've a question: if the management IP is not involved in Failover Network ot Config Sync, do I need to delete the Device Trust? I thought about these steps: force the standby unit offline change Management IP of the standby unit change Management IP of the active unit release standby unit from offline would there be traffic interruption? Does the Management IP define the Device Trust? As I've described, Failover Networks are HA and Inside Interface Thanks for Answers Karl
Solved
kgaigl
Nov 16, 2022 Place Technical Forum
1.8KViews
0likes
3Comments