HA Active Directory for F5 authentication
I have two f5 Big-IP wit LTM module in HA. I have configured Admin authentication in BIG-IP through Remote Active Directory and It works properly. The challenge is I have several synchronized AD servers and I would like to achieve HA in Big-IP authentication. I have created a pool with my AD servers with a custom LDAP monitor and It seems that works because all members look up in the pool. I also created a virtual server that listen in port 389 and use the AD server pool as default pool. However, when I set the host value to virtual server IP in system-->users-->authentication, all authentication attempts fail. Is required an special configuration in virtual server to make it work?
Client cert auth and TLS1.3
Good day. I have a SSL-site with enabled Client Cert Auth (Client cerificate request, frequency once). I'm trying to get access to this site with PKI-card via Mozilla and Chrome. When I enable TLS1.3 (option "no TLSv1.3" in client ssl-profile is disabled), I receive only a certificate request, but don't get a PIN prompt and then have an ERR_SSL_CLIENT_AUTH_NO_COMMON_ALGORITHMS error. : Connection error: ssl_hs_rx_tls13_cert:3672: alert(46) no certificate When I disable TLS1.3 (option no TLSv1.3 is enabled), I receive a certificate request, then enter PIN and after I have an access to web-site via TLS1.2. What should I do to have an TLS1.3 access to this site? Thank you.
Viprion files on blades.
Hello, I have a Viprion with 2 blades. When I am deleting ISO files on /shared/images they are coming back after a while. I am sure they arent used in any guest. I did the delete in CLI with a rm command. I saw this in the LTM logs on the VCMP host after the delete command. Dec 19 13:46:56 slot2/f5mechl2 notice vcmpd[13223]: 01510006:5: Adding BIGIP-13.1.1.2-0.0.4.iso to slot 1 map.
Big-IP Next 20.2.0-2.375.1+0.0.43 iRule count problem
I have very simple iRule to show the problem: when HTTP_REQUEST { set Client_IP [IP::client_addr] if { ($Client_IP starts_with "x.x.x.x") && ([HTTP::uri] equals "/seed") } { table set -subtable TABLE "key1" "value1" 30 table set -subtable TABLE "key2" "value2" 15 table set -subtable TABLE "key3" "value3" 45 HTTP::respond 200 content "Done" TCP::close return } set key_value "key1" set key_value2 "key2" set key_value3 "key3" set count [table keys -subtable TABLE -count] HTTP::respond 200 content " Remaining timeout / defined timeout for ${key_value} => [table lookup -notouch -subtable TABLE ${key_value}] [table timeout -subtable TABLE -remaining ${key_value}]/[table timeout -subtable TABLE ${key_value}] Remaining timeout / defined timeout for ${key_value2} => [table lookup -notouch -subtable TABLE ${key_value2}] [table timeout -subtable TABLE -remaining ${key_value2}]/[table timeout -subtable TABLE ${key_value2}] Remaining timeout / defined timeout for ${key_value3} => [table lookup -notouch -subtable TABLE ${key_value3}] [table timeout -subtable TABLE -remaining ${key_value3}]/[table timeout -subtable TABLE ${key_value3}] Count TABLE ${count}" } It looks like table -keys -subtable <tablename> -count don't work properly: Remaining timeout / defined timeout for key1 => value1 27/30 Remaining timeout / defined timeout for key2 => value2 12/15 Remaining timeout / defined timeout for key3 => value3 42/45 Count TABLE 0 My expected output would be 3 (as it is not timeouted), not 0. Can someone check if I am correct? Or tell me how I can count not expired entries in table.F5 Rseries HA
Dears, I know that there is no HA between rseries appliance, and the HA will be configured between tenants on each appliance, my question her about when i prepare to configure HA between Tenant so before making this i will configure the network setting and VLAN on F5OS so I will need a dedicated interface and HA VLAN between two tenants on each appliance so what is the next step after I configured the network setting on Appliance (F5OS), and what i need to confirm on the network setting that i will configure on each appliance (F5OS) to make HA between the two tenantsImport PKCS 12 SSL to Device Certificate via API/Script or CLI on BIG-IP
We have more than 160 BIG-IP Virtual Edition with version 15.1.10.3 build 0.0.12. We need to import, in each one, an SSL Certificate in PFX/PKCS 12 format in the path System ›› Certificate Management: Device Certificate Management: Device Certificate. We looked in the documentation and the KB but we couldn't find a way to do it. Has anyone dealt with this and have a solution to do it via Script, CLI or API? Thank you.
Overwriting or adding LTM SSL Traffic cert and key using iControlREST
Hi, I am trying to overwrite an existing cert and key within the LTM SSL Traffic cert and key using iControlREST. Here is the basic process, and result of each step. Upload key and cert PEM files to the uploads directory. I have tried this step both inside and outside of a transaction with the same result. This works fine. Create a transaction using the transaction REST endpoint. This works fine. Add a command to install the key over the desired SSL Traffic key referencing the local path from step 1 with the transaction id in the header. The command is set to install and from-local-file. Successfully added to the transaction commands. Add a command to install the key over the desired SSL Traffic cert referencing the local path from step 1 with the transaction id in the header. The command is set to install and from-local-file. Successfully added to the transaction commands. Get the transaction commands just to observe the contents. The commands are present, and the paths are correct per steps 3 & 4 above. Attempt to commit the transaction, and receive the failure with a message like the one below. message=transaction failed:01070712:3: file (/var/system/tmp/tmsh/GexeqO/IIS-F5v13.key) expected to exist. As you can see, F5 is looking in a different directory than specified in steps 3 & 4. I've closely examined all requests and responses using Fiddler, and there's no way to determine the randomly generated sub directory name ('GexeqO' in this particular case). It is different each transaction. Also note, this happens even when not overwriting existing entries. But I am using a transaction so that I don't get the 'key and certificate do not match' message. Any insights would be tremendously helpful. Best, Gary
TCP RST from remote system error in F5
Hi, I am unable to access the URL externally that i have defined in F5 for reverse proxy and it shows an error connection refused by host and the below error in F5 R 162:162(0) ack 982 win 5121 out slot1/tmm1 lis=/Common/vs_ext_skype__https flowtype=64 flowid=570065ECFE00 peerid=570065CB5D00 conflags=4820124 inslot=63 inport=55 haunit=1 rst_cause="[0x19080da:2106] {peer} TCP RST from remote system" peerremote=00000000:00000000:0000FFFF:0A606211 peerlocal=00000000:00000000:0000FFFF:0A606204 remoteport=4443 localport=60380 proto=6 vlan=98 Can this be any error in F5 config