Hi @Ganns ,
Well , you should share your network design , or at least what are network devices that locate in front of BIG-IP.
>> you can access this Virtual server through internal network with Virtual server Private IP and this is fine.
>> I will assume that you have Firewall in front of Bigip and facing internet ( Public Range of IPs ).
So you need to follow the below steps :
>>> If that not clear , let me know more about your network design to be able to help more and have good visability to recommend somthing for you 🙂
Hi @Ganns ,
There is no specific design or video for that , but there is standards.
Look at this design , I tried to mimic the production scenario for you when publishing Bigip virtual server on the internet:
Please have a look on this snap shot and my first reply.
you should do the same in your network if you want to publish virtual server through internet.
I don't know your network design , what in front of or behind your BIGIP.
you can share it with me and I will do my best to create a flow design for you.
What I sent is the standard to do that and based on what I have seen in multiple environments.
I communicated with internal team regarding this issue, they was saying all configuration on firewall such as NAT and assign public IP for this VS has been done please check on F5 configration now I wont know how check the traffic hilts on VS and advice if any any configration it must modify it , check the aatched if need any modfiy it