Path Check Monior to trigger Failover

[Brandon]

Good Afternoon 

I have two traffic groups and two LTMS. 

F5 Box1  Traffic group 1 is Active    Traffic Group 2 Standby

F5 Box 2 Traffic group 2 is Active  Traffic Group 1 Standby 

I want to do a Path Check Monitor to go out Box 1   simple Get req for google .com and one other site . if the get isn't successful.  I would like Traffic Group 1 on F5 Box 1  to fail over to F5 Box 2  

Does anyone have an example or docs i can refer to .. 

Thanks in advance

[Dario_Garrido]

Hello @Brandon,

You can use HA Groups

https://support.f5.com/csp/article/K42542000

[Nikoolayy1]

As it was mentioned HA Groups are a way to go.

Other than that for monitoring the gateway devices gateway failsafe is also a nice option (there is even a vlan failsafe but as the pool members are not directly connected it will not work):

https://support.f5.com/csp/article/K75303031

Other that an icall script could also monitor the logs and trigger a failover:

https://community.f5.com/t5/technical-articles/what-is-icall/ta-p/288206

F5 has so many ways to do different things it is crazy 🙂 . Do not forget to mark the solution that works for you as accepted if it is found.