Forum Discussion
M_Afifi
Jun 12, 2021Altostratus
Hi Mostafa,
This can be implemented by using one VLAN and a default route in the BIGIP.
You will have to configure F5 BIGIP with self IPs in the same vlan and create a default route pointing to your router.
In case your back-end servers (pools members) in a different VLAN the F5 will reach these servers via the router. Otherwise, if your back-end servers are in the same VLAN make sure to use SNAT or make the F5 floating IP as the back-end servers Gateway.
I hope this helps.
Best Regards.