Forum Discussion

D99's avatar
D99
Icon for Cirrus rankCirrus
Mar 07, 2023
Solved

New Virtual Server Pool, Self IP and routing configuration

Hi Experts, I am stuck with a situation I have a existing virtual server pool 10.60.85.0/26 and associated self IP's 10.60.85.2(non floating) & 3(floating) and gateway 10.60.85.1 on Network firewal...
  • Paulius's avatar
    Mar 07, 2023

    D99 It sounds to me like you have automap configure as the SNAT method which will always use the self-IP of the interface closest to the destination. I would not use automap for any of your virtual servers (VS) unless absolutely necessary for various reasons that I won't go into at this moment. I recommend creating a SNAT pool and labeling it SNAT_10.60.94.5 and adding IP 10.60.94.5 to that pool and then under the new VS you will select the SNAT pool you just created called SNAT_10.60.94.5. Once you have SNAT configured the way I have defined you will now see traffic for the VS arriving as 10.60.94.5 to the destination servers.