Forum Discussion
sudeep_patil_35
Nimbostratus
NimbostratusLoad balancing the ISE services Radius and HTTPS
I'm trying to load balance the Cisco ISE services Radius and HTTPS service using the F5 LTM. To setup the irule i'm following the procedure given on the Cisco portal https://www.cisco.com/c/en/us...
Andrew_Husking
Cirrus
CirrusI believe the RADIUS commands are no longer allowed in the CLIENT_ACCEPTED events.
We solved the issue by doing priority groups to ensure that everything went to the same server.
Andrew_HuskingCirrus
Cirrusltm pool iseportal {
load-balancing-mode least-connections-node
members {
node1:8443 {
address 1.1.1.1
}
node2:8443 {
address 2.2.2.2
priority-group 10
}
}
min-active-members 1
}Here you go.
