F5 is upgrading its customer support chat feature on My.F5.com. Chat support will be unavailable from 6am-10am PST on 1/20/26. Refer to K000159584 for details.

Forum Discussion

Bhavik_1402's avatar
Bhavik_1402
Icon for Nimbostratus rankNimbostratus
Apr 28, 2021

The documentation is provided by Application Vendor and I've tested as below. The Receive string is "ok".

 

do I need to mentioned in Receive string as "200 OK" or only "OK" ? is it case sensitive?

 

config # curl -k http://X.X.X.X:8445/Sample/healthchecksimple

Bad Request

This combination of host and port requires TLS.

config # curl -k https://X.X.X.X:8445/Sample/healthchecksimple

ok

 

--------------

I'm struggling to configure Send string. do i need to select HTTP or HTTP monitor?

 

I've tried few syntax but still failing.

 

GET /Sample/healthchecksimple HTTP/1.1\r\nHost: \r\n\r\n

 

GET /Sample/healthchecksimple HTTP/1.1\r\nHost: xyz.ab.com\r\n\r\n

 

GET /Sample/healthchecksimple HTTP/1.1\r\nHost: xyz.ab.com\r\nConnection: Close\r\n\r\n

 

is it mandatory to use xyz.ab.com after Host: for HTTP 1.1 ? any suggestions?

 

boneyard's avatar
boneyard
Icon for MVP rankMVP
Apr 29, 2021

well that usually is more focused on the first reponse line you see in the header

HTTP/1.1 200

this often is 

HTTP/1.1 200 OK

and then the 200 OK makes sense, in your case there are several lines between the 200 and the ok (also lower case).