So would the VSERVER would remain up?status in gui is offline (enabled).
[root@ve10:Active] config b virtual
VIRTUAL ADDRESS 172.28.19.252 UNIT 1
| ARP enable
| (cur, max, limit, tot) = (0, 2, 0, 2)
| (pkts,bits) in = (7, 3216), out = (4, 1760)
+-> VIRTUAL bar-tcp SERVICE 53
| PVA acceleration none
| (cur, max, limit, tot) = (0, 1, 0, 1)
| (pkts,bits) in = (4, 1776), out = (4, 1760)
| requests (total) = 0
+-> RULE myrule
+-> CLIENT_ACCEPTED 2 total 0 fail 0 abort
+-> POOL foo-a LB METHOD round robin MIN/CUR ACTIVE MEMBERS 0/0
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
+-> POOL MEMBER foo-a/200.200.200.101:53 inactive,down
| session enabled priority 0 ratio 1
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
| requests (total) = 0
VIRTUAL ADDRESS 172.28.19.252 UNIT 1
| ARP enable
| (cur, max, limit, tot) = (0, 2, 0, 2)
| (pkts,bits) in = (7, 3216), out = (4, 1760)
+-> VIRTUAL bar-udp SERVICE 53
| PVA acceleration none
| (cur, max, limit, tot) = (0, 1, 0, 1)
| (pkts,bits) in = (3, 1440), out = (0, 0)
| requests (total) = 0
+-> RULE myrule
+-> CLIENT_ACCEPTED 2 total 0 fail 0 abort
+-> POOL foo-a LB METHOD round robin MIN/CUR ACTIVE MEMBERS 0/0
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
+-> POOL MEMBER foo-a/200.200.200.101:53 inactive,down
| session enabled priority 0 ratio 1
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
| requests (total) = 0