Good afternoon community,
I have a question related to my device
I have configured the following:
What i want to achive is that: I want that IP address assigned to external (DMZ) 10.123.105. to forward traffic to my internal 10.123.101. subnet.
I have configured the following Virtual Server
I want to test it using 3389 (RDP).
What i am missing, if someone could help?
I would change the VS type to "Forwarding (IP)". You should only use other types if you need to apply any kind of logic to the traffic.
Make sure that the VS is listening on the dmz vlan and that the return traffic from the gateway in vlan 102 know how to get to the dmz addresses (via the selfip on the F5).