Forum Discussion

young19918's avatar
young19918
Icon for Altocumulus rankAltocumulus
May 18, 2023

About IPsec Interface

Hello, When I was building IPsec Interface  I found that I could not select the option I wanted... But I've obviously put this option up .... Why can't I select it in " Tunnels : Profi...
application delivery
Paulius's avatar
Paulius
Icon for MVP rankMVP

young19918 Can you provide the rest of the associated configuration for this IPsec VPN? From my understanding the following is all that should be configured, assuming you have done all the prerequisits such as a self-IP.

1. Create a forwarding virtual server for IPsec. This should listen on destination 0.0.0.0/0, all ports, all protocols, and all vlans and tunnels
2. Create an IKE peer
3. Create an IPsec policy
4. Create an IPsec traffic selector. Make sure this one is above the default.

The following article might help you in this configuration.

https://techdocs.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/bigip-tmos-tunnels-ipsec-13-0-0/10.html

young19918's avatar
young19918
Icon for Altocumulus rankAltocumulus
May 24, 2023

Hi Paulius ,

Yes, I have already configured.

1.  Forwarding_IP

2. IKE peer

3. Ipsec policy

4. IPsec traffic selector

 

 

  • Paulius's avatar
    Paulius
    Icon for MVP rankMVP
    May 24, 2023

    young19918 And nothing is showing up in any of your VPN related logs on the F5?

      • Paulius's avatar
        Paulius
        Icon for MVP rankMVP
        May 25, 2023

        young19918 Anything in the logs on the other end?