cancel
Showing results for 
Search instead for 
Did you mean: 

Problem this snippet solves:

This Perl script will enable or disable all instances of a node address and port across all pools.

Code :

#!/usr/bin/perl
#----------------------------------------------------------------------------
# The contents of this file are subject to the "END USER LICENSE AGREEMENT FOR F5
# Software Development Kit for iControl"; you may not use this file except in
# compliance with the License. The License is included in the iControl
# Software Development Kit.
#
# Software distributed under the License is distributed on an "AS IS"
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
# the License for the specific language governing rights and limitations
# under the License.
#
# The Original Code is iControl Code and related documentation
# distributed by F5.
#
# The Initial Developer of the Original Code is F5 Networks,
# Inc. Seattle, WA, USA. Portions created by F5 are Copyright (C) 1996-2004 F5 Networks,
# Inc. All Rights Reserved.  iControl (TM) is a registered trademark of F5 Networks, Inc.
#
# Alternatively, the contents of this file may be used under the terms
# of the GNU General Public License (the "GPL"), in which case the
# provisions of GPL are applicable instead of those above.  If you wish
# to allow use of your version of this file only under the terms of the
# GPL and not to allow others to use your version of this file under the
# License, indicate your decision by deleting the provisions above and
# replace them with the notice and other provisions required by the GPL.
# If you do not delete the provisions above, a recipient may use your
# version of this file under either the License or the GPL.
#----------------------------------------------------------------------------

#use SOAP::Lite + trace => qw(method debug);
use SOAP::Lite;
use MIME::Base64;

#----------------------------------------------------------------------------
# Validate Arguments
#----------------------------------------------------------------------------
my $sHost = $ARGV[0];
my $sUID = $ARGV[1];
my $sPWD = $ARGV[2];
my $sNodePort = $ARGV[3];
my $sEnable = $ARGV[4];
my $sProtocol = "https";
my $sPort = 443;

if ( ($sHost eq "") or ($sUID eq "") or ($sPWD eq "") )
{
die ("Usage: NodeServer.pl host uid pwd [[node_port] [enable|disable]]\n");
}

#----------------------------------------------------------------------------
# support for custom enum types
#----------------------------------------------------------------------------
sub SOAP::Deserializer::typecast
{
my ($self, $value, $name, $attrs, $children, $type) = @_;
my $retval = undef;
if ( "{urn:iControl}LocalLB.AvailabilityStatus" == $type )
{
$retval = $value;
}
return $retval;
}

#----------------------------------------------------------------------------
# Transport Information
#----------------------------------------------------------------------------
sub SOAP::Transport::HTTP::Client::get_basic_credentials
{
return "$sUID" => "$sPWD";
}

$Pool = SOAP::Lite
-> uri('urn:iControl:LocalLB/Pool')
-> proxy("$sProtocol://$sHost:$sPort/iControl/iControlPortal.cgi");
eval { $Pool->transport->http_request->header
(
'Authorization' => 
'Basic ' . MIME::Base64::encode("$sUID:$sPWD", '')
); };

$PoolMember = SOAP::Lite
-> uri('urn:iControl:LocalLB/PoolMember')
-> proxy("$sProtocol://$sHost:$sPort/iControl/iControlPortal.cgi");
eval { $PoolMember->transport->http_request->header
(
'Authorization' => 
'Basic ' . MIME::Base64::encode("$sUID:$sPWD", '')
); };


#----------------------------------------------------------------------------
# sub ListPoolsAndMembers
#----------------------------------------------------------------------------
sub ListPoolsAndMembers()
{
my ($node_addr_port) = (@_);
my ($node_addr, $node_port) = split(/:/, $node_addr_port, 2);

my @pool_list = &getPoolList();
my @object_status_lists = &getObjectStatusLists(@pool_list);



# Loop over pools
for $i (0 .. $#pool_list)
{
$bFound = 0;
$pool = @pool_list[$i];

if ( "" == $node_addr )
{
# if no node given, print out full list
print "Pool $pool\n";
foreach $status (@{@object_status_lists[$i]})
{
$member  = $status->{"member"};
$addr = $member->{"address"};
$port = $member->{"port"};

$ostat = $status->{"object_status"};
$astat = $ostat->{"availability_status"};
$estat = $ostat->{"enabled_status"};

print "        $addr:$port ($astat, $estat)\n";
}
#print "\n";
}
else
{
# else, only print out where matches are found.
foreach $status (@{@object_status_lists[$i]})
{
if ( !$bFound )
{
$member  = $status->{"member"};
$addr = $member->{"address"};
$port = $member->{"port"};

$ostat = $status->{"object_status"};
$astat = $ostat->{"availability_status"};
$estat = $ostat->{"enabled_status"};

if ( ($node_addr eq $addr) && ($node_port eq $port) )
{
$bFound = 1;
}
}
}
if ( $bFound )
{
print "Pool $pool : $node_addr:$node_port ($astat, $estat)\n";
}
}
}
}

#----------------------------------------------------------------------------
# sub setNodeServer
#----------------------------------------------------------------------------
sub SetNodeServer()
{
my ($node_addr_port, $state) = (@_);
my ($node_addr, $node_port) = split(/:/, $node_addr_port, 2);
my @pool_list = &findPoolsFromMember($node_addr_port);
my $member = { address => $node_addr, port => $node_port };
my $ENABLED_STATE = "STATE_ENABLED";

if ( $state eq "disable" )
{
$ENABLED_STATE = "STATE_DISABLED";
}

my $MemberMonitorState  = { member => $member, monitor_state => $ENABLED_STATE };
my @MemberMonitorStateList;
push @MemberMonitorStateList, $MemberMonitorState;

my @MemberMonitorStateLists;
for $i (0 .. $#pool_list)
{
push @MemberMonitorStateLists, [@MemberMonitorStateList];
}

# Make call to set_monitor_state 
$soapResponse = $PoolMember->set_monitor_state(
SOAP::Data->name(pool_names => [@pool_list]),
SOAP::Data->name(monitor_states => [@MemberMonitorStateLists])
);
&checkResponse($soapResponse);

print "Node Server $node_addr_port set to $ENABLED_STATE in pools: ";
foreach $pool (@pool_list)
{
print "$pool, ";
}
print "\n";
}


#----------------------------------------------------------------------------
# sub getPoolList
#----------------------------------------------------------------------------
sub getPoolList()
{
# Get the list of pools
$soapResponse = $Pool->get_list();
&checkResponse($soapResponse);
my @pool_list = @{$soapResponse->result};

return @pool_list;
}

#----------------------------------------------------------------------------
# sub getMemberLists
#----------------------------------------------------------------------------
sub getMemberLists()
{
my (@pool_list) = (@_);

# Get the list of pool members for all the pools
$soapResponse = $Pool->get_member
(
SOAP::Data->name(pool_names => [@pool_list])
);
&checkResponse($soapResponse);
@member_lists = @{$soapResponse->result};

return @member_lists;
}

#----------------------------------------------------------------------------
# sub getObjectStatus
#----------------------------------------------------------------------------
sub getObjectStatusLists()
{
my (@pool_list) = (@_);

# Get the list of pool members for all the pools
$soapResponse = $PoolMember->get_object_status
(
SOAP::Data->name(pool_names => [@pool_list])
);
&checkResponse($soapResponse);
@object_status_lists = @{$soapResponse->result};

return @object_status_lists;
}

#----------------------------------------------------------------------------
# sub findPoolsFromMember
#----------------------------------------------------------------------------
sub findPoolsFromMember()
{
my ($node_addr_port) = (@_);
my ($node_addr, $node_port) = split(/:/, $node_addr_port, 2);
my @pool_match_list;

my @pool_list = &getPoolList();
my @member_lists = &getMemberLists(@pool_list);

for $i (0 .. $#pool_list)
{
$pool = @pool_list[$i];
foreach $member (@{@member_lists[$i]})
{
$addr = $member->{"address"};
$port = $member->{"port"};

if ( ($node_addr eq $addr) && ($node_port eq $port) )
{
push @pool_match_list, $pool;
}
}
}
return @pool_match_list;
}

#----------------------------------------------------------------------------
# checkResponse
#----------------------------------------------------------------------------
sub checkResponse()
{
my ($soapResponse) = (@_);
if ( $soapResponse->fault )
{
print $soapResponse->faultcode, " ", $soapResponse->faultstring, "\n";
exit();
}
}

#----------------------------------------------------------------------------
# main app logic
#----------------------------------------------------------------------------
if ( ($sNodePort ne "") && ($sEnable ne "") )
{
&SetNodeServer($sNodePort, $sEnable)
}
else
{
&ListPoolsAndMembers($sNodePort)
}
Comments
EElin_237494
Nimbostratus
Nimbostratus
Wondering if anyone has successfully used this script yet? Regardless of the options I select (disable/enable etc) I get same output "Node Server [[...] set to STATE_ENABLED in pools" EElin
badri123_123_28
Nimbostratus
Nimbostratus

use SOAP::Lite; use UNIVERSAL 'isa';

 

$ENV{'PERL_LWP_SSL_VERIFY_HOSTNAME'} = 0;

 

my $sHost = "xxxxxxx";

 

my $sUID = admin; EM User (administrator role) my $sPWD = "yyyyyy"; EM Password my $sPoolMember = $ARGV[0]; BIG-IP Pool Member my $sState = $ARGV[1]; BIG-IP Pool Member State: enable/disable

 

my $proxy_uri = sprintf(" $sHost); my $soap = SOAP::Lite->proxy($proxy_uri);

 

sub SOAP::Transport::HTTP::Client::get_basic_credentials { return $sUID => $sPWD; }

 

sub checkResponse() { my ($soapResponse) = (@_); if ( $soapResponse->fault ) { print $soapResponse->faultcode, " ", $soapResponse->faultstring, "\n"; exit(); } }

 

sub getPoolList() {

 

$soapResponse = $soap->uri("urn:iControl:LocalLB/Pool")->get_list(); &checkResponse($soapResponse); my @get_list = @{$soapResponse->result}; return @get_list;

}

 

@value = getPoolList();

 

foreach $a (@value){ print "value of a: $a\n"; }

 

I got the list from only /common partition Is there any way to get all the list from all partition.

 

Version history
Last update:
‎07-Mar-2015 15:06
Updated by:
Contributors