BigIP Report Old
Problem this snippet solves:
This codeshare has been deprecated due to a hosting platform corruption. I have moved code and conversation to a new record (on the same original URL) https://devcentral.f5.com/s/articles/bigip-report
can be Overview
This is a script which will generate a report of the BigIP LTM configuration on all your load balancers making it easy to find information and get a comprehensive overview of virtual servers and pools connected to them.
This information is used to relay information to our NOC and developers to give them insight in where things are located and to be able to plan patching and deploys. I also use it myself as a quick way get information or gather data used as a foundation for RFC's, ie get a list of all external virtual servers without compression profiles.
The script has been running on 13 pairs of load balancers, indexing over 1200 virtual servers for several years now and the report is widely used across the company and by many companies and governments across the world.
It's easy to setup and use and only requires guest permissions on your devices.
Demo/Preview
Please note that it takes time to make these so sometimes they're a bit outdated and they only cover one HA pair. However, they still serve the purpose of showing what you can expect from the report.
Interactive demo
http://loadbalancing.se/bigipreportdemo/
Screen shots
The main report:
The device overview:
Certificate details:
How to use this snippet:
This codeshare has been deprecated due to a hosting platform corruption. I have moved code and conversation to a new record (on the same original URL) https://devcentral.f5.com/s/articles/bigip-report
Installation instructions
BigipReport REST
This is the only branch we're updating since middle of 2020 and it supports 12.x and upwards (maybe even 11.6).
Download: https://loadbalancing.se/downloads/bigipreport-v5.5.4.zip
Documentation, installation instructions and troubleshooting: https://loadbalancing.se/bigipreport-rest/
Docker support
This will be the recommended way of running bigipreport in the near future. It's still undergoing testing but it's looking really good so far.
https://loadbalancing.se/2021/01/05/running-bigipreport-on-docker/
BigipReport (Legacy)
Older version of the report that only runs on Windows and is depending on a Powershell plugin originally written by Joe Pruitt (F5).
BigipReport (Stable):
https://loadbalancing.se/downloads/bigipreport-5.3.1.zip
BigipReport (BETA): https://loadbalancing.se/downloads/bigipreport-5.4.0-beta.zip
iControl Snapin: https://loadbalancing.se/downloads/f5-icontrol.zip
Documentation and installation instructions:
https://loadbalancing.se/bigip-report/
Upgrade instructions
Protect the report using APM and active directory
Written by DevCentral member Shann_P:
https://loadbalancing.se/2018/04/08/protecting-bigip-report-behind-an-apm-by-shannon-poole/
Got issues/problems/feedback?
Still have issues? Drop a comment below. We usually reply quite fast. Any bugs found, issues detected or ideas contributed makes the report better for everyone, so it's always appreciated.
---
Also trying out a Discord channel now. You're welcome to hang out with us there:
Code :
85931,86647,90730
Tested this on version:
13.0
974 Comments
nadj_354479Nimbostratus
Hi,
its not fonctionel this is on error : PS D:\Users\u163740\Documents> .\teste3.ps1 Unable to create user, trying v12 syntax Unable to create user neither with v12 or v11 syntax on 10.163.13.10 PS D:\Users\u163740\Documents>
Man, it's almost like it's not meant to happen. 🙂
If you enter
in the Powershell prompt after it failed, what is the error messages you get?$Error/Patrik
- nadj_354479
on the other hand I tested the code that works on version 12, but he created it in mode, no access, it's bizard !!
the code is : https://pastebin.com/pqXX6zir
I still need the output from the
variable. And it looks like the link you pasted goes to the old script not the new one. I could see from your comments though that you tried the new script. And that's' the script I need the output from the$Error
variable (just simply issue$Error
after the script has failed and PowerShell will show you the error messages.$ErrorHeads up. I feel a fever coming so I might not be so responsive for a while.
/Patrik
- nadj_354479
I told you that the first script I test it on the version 12 to see if that is functional and he gave me the error which I sent you on the picture , he created not the guest but to no acess
for the out the capture joint :
- nadj_354479
good recovery :)
Thanks. :)
Try this.
- Edit this script with your details: https://pastebin.com/SQnppKNg (it's a new script only for v11)
- Start a new powershell session (some of the errors you got comes from re-using the same session)
- Run the script against one v11 device.
Send me the error message (translate it to english if you can... My french is worse than my Chinese. :)
Hermann_Amon_23Hi, Any idea about GTM configuration integration with bigipreport tool ? :)
- nadj_354479
this an error
- nadj_354479
not a clear idea so far, but I think to integrate it with a system of vulnerability detection
