Forum Discussion
Rajeev
Nimbostratus
NimbostratusWould Auto last hop feature work with multi vrf environment on F5
Hi Team, this is regarding auto last hop feature, If we have two vrf on upstream device(switch) and the traffic is coming on respective VIPs on F5 , we have auto last hop feature enabled on F5, then...
In additon to what PSFletchTheTek wrote, Auto Last Hop only applies to traffic from clients towards the F5. For the traffic that goes from the F5 towards the pool members, the routing table is used. So, if I understand your network topology correctly this setup should work fine with Auto Last Hop enabled. The F5 will just return the packet towards the client to the same interface it came in at first.
In additon to what PSFletchTheTek wrote, Auto Last Hop only applies to traffic from clients towards the F5. For the traffic that goes from the F5 towards the pool members, the routing table is used. So, if I understand your network topology correctly this setup should work fine with Auto Last Hop enabled. The F5 will just return the packet towards the client to the same interface it came in at first.
RajeevNimbostratus
NimbostratusThank you all for your support and solutions.I have tested auto last hop option and it is working as expected. Thanks All.