VS is not working

Thanks Cody,

 

I'm trying to make a capture but is empty:

 

[root@:Active] config tcpdump -e -i 0.0 -nn -p host 10.190.8.10 and host 10.190.23.1 and port 80 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on 0.0, link-type EN10MB (Ethernet), capture size 96 bytes ^C 0 packets captured 0 packets received by filter 0 packets dropped by kernel [root@Prod_A:Active] config tcpdump -e -i 0.0 -nn -p host 10.190.8.10 and host 10.190.23.2 and port 80 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on 0.0, link-type EN10MB (Ethernet), capture size 96 bytes ^C 0 packets captured 0 packets received by filter 0 packets dropped by kernel [root@Prod_A:Active] config

 

Ltm::Node: 10.190.23.2 (10.190.23.2)

Status

 

Availability : available State : enabled Reason : Node address is available Monitor : /Common/gateway_icmp (default node monitor) Monitor Status : up Session Status : enabled

 

Ltm::Node: 10.190.23.1 (10.190.23.1)

Status

 

Availability : available State : enabled Reason : Node address is available Monitor : /Common/gateway_icmp (default node monitor) Monitor Status : up Session Status : enabled

 

Ltm::Pool: http_pool

Status

 

Availability : available

 

State : enabled

 

Reason : The pool is available Monitor : http and /Common/tcp_half_open Minimum Active Members : 0

 

Current Active Members : 2

 

Total Requests : 0

 

Thanks for your time