Forum Discussion
CirrostratusVirtual Server
Viprion Chasis
On the LTM I created 2 nodes pool 443 and virtual servers listening on port 443. As far as the F5 everything is up all green.
When you https to the vip you receive the errror, the "webpage not available" . When you https to the actually server it works.
We have snat automap enabled
5 Replies
Cory_50405Noctilucent
Do you have an HTTP profile assigned to the virtual server without a client SSL profile applied?
- Cory_50405
Can you please post the virtual server configuration? Sanitize if needed.
Brandonltm virtual xxxxxxx { destination 172.x.x.x:https ip-protocol tcp mask 255.255.255.255 partition VSoft pool Svtm_pool profiles { /Common/http { } /Common/tcp { } Staging { context clientside } staging_atm { context serverside } } snat automap vlans-disabled }
- Brandon
ltm virtual xxxxxxx { destination 172.x.x.x:https ip-protocol tcp mask 255.255.255.255 partition VSoft pool Svtm_pool profiles { /Common/http { } /Common/tcp { } Staging { context clientside } staging_atm { context serverside } } snat automap vlans-disabled } - Cory_50405
I see nothing obvious that would cause communications to fail, as your config looks good. May be best to run a tcpdump on your LTM and capture on the server IP address:
tcpdump -nni 0.0:n -s0 host serveripaddress
