Virtual server traffic logs not coming in F5 or Remote logging

Hi Muthu_435  - were you able to get it working with Mohamed_Ahmed_Kansoh's advice?

Hi Muthu_435 , 
From your query , I see you need to log all traffic , which is a bad approach no need for that. 

You need to log all traffic in troubleshooting by Taking Packet captures / or assigning irule or Local traffic policy to do that. 

It's applicable yes , but in heavy virtual servers / Websites , you will fill your Log files with un needed info for normal users. 

But you still can do it. 

create simple LTM policy and Log ( Client address , Virtual server Local address ) also you can Log almost any information in each request , but this a bad approach and recommended to keep your logfiles for errors / or alarms only. 

Code

when CLIENT_ACCEPTED {
   set client "[IP::client_addr]:[TCP::client_port]"
      set vip "[IP::local_addr]:[TCP::local_port]"
         set snat "unknown"
            set node "unknown"
            }
   when SERVER_CONNECTED {  
     set snat "[IP::local_addr]:[TCP::local_port]"
      set node "[IP::server_addr]:[TCP::server_port]"
                }
    when CLIENT_CLOSED {
        log connection info
          log local0.info "Client $client -> VIP: $vip -> SNAT: $snat -> Node: $node"
          }

This is a sample irule for that , I haven't test it but it's logic looks fine.
but as I said this is a bad approch , use it only for debugging or troubleshooting and disable it in normal scenarios / cases.

I hope this helps you 🙂