Forum Discussion
D_VCUHS_116063
Nimbostratus
NimbostratusVIP to VIP communications on the same BigIP LTM
Is it possible to have two members of a pool, communicate with members of a different pool using their VIPs? Both pools are configured on the same BigIP LTM, doing an Air Watch implementation which h...
Yes, it is possible.
nitass_89166
Noctilucent
NoctilucentPool1 to communicate with Pool2
VIP(DS)443 -----> VIP(SG)
when pool1 wants to talk to pool2, does it talk to virtual server ip (i.e. sg) or pool member ip (i.e. sg1 or sg2)?
if it is virtual server ip, can you try to add pool1 vlan (i.e. ds1/ds2 vlan) on pool2's virtual server (i.e. sg)?
D_VCUHS_116063Adding SG1 and SG2 to pool 2, will it also cause both to be Load balanced by VS(SG). VS(SG) and VS(DS) are load balancing for incoming connections from other clients.- nitass_89166no, i mean enabling vlan on virtual server.
- D_VCUHS_116063Is this under the VS configuration " VLANS and Tunnels" ? Currently I have the vlan of the shared network interface to a firewall selected.
- nitass_89166yes, it is vlans and tunnels. what i mean is to add pool's vlan e.g. add pool1's vlan to pool2's virtual server.
- D_VCUHS_116063The members assigned to Pool1 and Pool2 are in the same vlan. They all have ip addresses in 10.70.7.0/24 subnet and the BIG LTM interface in that same IP subnet is there default gateway.