Forum Discussion

Timothy_92333's avatar
Timothy_92333
Icon for Nimbostratus rankNimbostratus
Jul 07, 2014

vCMP Guests - Traffic Group shows "Initializing / Not Synced"

Folks,   I have two vCMP guests on a Viprion blade that were on 11.3 HF5 with no issues but as of a few minutes ago are now on 11.3 HF9. The configs have synced across peers - I have pretty green...
f5 viprion
vcmp
  • hari_126827's avatar
    hari_126827
    Jul 08, 2014

    Hi Timothy,

     

    Please check below site: http://support.f5.com/kb/en-us/solutions/public/13000/900/sol13946.html

     

    Above site link will have good info which could be found for configsync DSC issues... I had seen similar issue on Viprion chassis.,but resolved after reboot of vCMPs..

     

    But the above link will provide more information specific to mcpd service.. link on core system services info: http://support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/tmos_management_guide_10_1/tmos_appendix_c_system_services.html

     

Frans_van_Dokku's avatar
Frans_van_Dokku
Icon for Nimbostratus rankNimbostratus
Jun 01, 2015

For us the following worked on version 11.6.0 HF4: "bigstart restart sod"

 

Because you will restart this process, the load balancer will again check his traffic groups and status. We saw that the 'next device option' has been filled in with the other node.

 

After this we were possible to put the active node in standby modes and otherwise.

 

Remember: After a reload/reboot of the node the same behavior can be coming back. So check this we you do a reload of a reboot.

 

This is known bug by F5 and haven't been solved in the version 11.6.0. HF4.

 

Regards,

 

Frans van Dokkumburg