For more information regarding the security incident at F5, the actions we are taking to address it, and our ongoing efforts to protect our customers, click here.

Forum Discussion

JG_62160's avatar
JG_62160
Icon for Nimbostratus rankNimbostratus
Aug 18, 2009

Upgrade from 9.3.0 to 10.0 questions

I have two LTM 1500's running version 9.3.0 and I'm ready to upgrade to 10.0. I'm running Active/Standby so I presume it should work like this:     1. Upgrade the standby unit to 10.0, ve...
config
design
The_Bhattman's avatar
The_Bhattman
Icon for Nimbostratus rankNimbostratus
Aug 18, 2009
I concur with Denny. Further more you need to realize that the once you reboot the standby unit any mirrored connections you may have are gone, especially if one of the units is on a different version. I have tested this with network fail over and unfortunately it hasn't worked for me - however, this is based on how my F5s are setup. My suggestion is to have a F4 account manager setup a case and have an engineer available during this cut over to make sure you can get assistance quickly in case something goes wrong.

 

 

Thanks,

 

CB