Forum Discussion

trungleon_11288's avatar
trungleon_11288
Icon for Nimbostratus rankNimbostratus
Mar 14, 2012

Unstable with Virtual Servers when running Active/Standby F5 Big-IP LTM 3600 ver 11.1

Hi all,     Our system have two F5 Big-IP LTM 3600 running under TMOS ver 11.1 with Active/Standby Mode. They have information as followings:     1. F5_01:   VLAN DMZ (Internal) Self...
config
design
trungleon_11288's avatar
trungleon_11288
Icon for Nimbostratus rankNimbostratus
Mar 18, 2012
Hi Techgeeeg,

 

 

I'm using the network & serial cable for the Failover link on both unit under ver TMOS 11.1. I have taken out one unit and all network cable related, then removed the HA configuration. At that time, only one unit is run with stand alone mode but the upstream link aggregation (L1.1, L1.2, L1.3, L1.4) to Switch was still unstable. They were been switchover up to down and reconnect frequently. Really, I didn't know what was going on with them, even though i have checked network cable, upstream devices carefully.

 

 

Now, I have decided to boot the Unit to diiferent volume with TMOS 10.2.2 and everything is OK. I'm afraid of the operation with TMOS 11.1, maybe it can't stable operation with my device (BIG-IP LTM 3600).

 

 

Thanks.
Related Content