Forum Discussion
Traffic Forwarding to a Single Member in the Pool.
Hi
There are 2 servers in the pool and both of them are active.
Can we forward traffic to only Server-1 of the Pool and forward the traffic to Server-2 only if Server-1 is unavailable or unresponsive.
Thanks,
Yugandhar.
- iaine
Nacreous
Hi
Take a look at Pool Priority Group Activation - https://techdocs.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/ltm-basics-13-0-0/4.html
- Yugandhar
Nimbostratus
Thank you Iaine.
Please correct me if I am wrong about the load balancing of the traffic between members when priority activation group is configured in the following scenarios
Scenario 1:-
=============
Suppose if we have 3 members in the Pool and have configured 2 servers with a priortity value of 10 and the remaining server with a priority value of 7.Here the minimum active members are set to 2 then if one server with priortity value of 10 goes down then the connections would be load balanced between the remaining one server with priority value of 10 and the server in the priority value of 7.
Scenario 2:-
=============
Suppose if we have 2 members in the Pool and have configured 1 server with a priortity value of 10 and the remaining server with a priority value of 7. Here the minimum active member is set to 1 then if the server with priortity value of 10 goes down then only the connections would be forwarded to the server with a priority value of 7, till the server with priority value of 10 becomes active.
Thanks,
Yugandhar.
- dirome
Cirrus
Yugandhar,
- Yes
- I don't think so, because the connections are established with the before server, and i think that for the new server will come the just the new connections
- Yugandhar
Nimbostratus
Hi Dirome,
I didn't understand your 2nd point regarding the following scenario
Scenario 2:--
=============
Suppose if we have 2 members in the Pool and have configured 1 server with a priortity value of 10 and the remaining server with a priority value of 7. Here the minimum active member is set to 1 then if the server with priortity value of 10 goes down then only the connections would be forwarded to the server with a priority value of 7, till the server with priority value of 10 becomes active.
Thanks,
Yugandhar.
Recent Discussions
Related Content
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com