Hi, I dont see the attached iRules to a VS when I run the command "tmsh list ltm virtual" Any thoughts on this ? Whats the best command to see the list of VS on a LTM along with attached profiles, irules and what not. Thanks, MSK

I dont see the attached iRules to a VS when I run the command "tmsh list ltm virtual" do you see irule in gui? if it is assigned to virtual server, it should be shown in tmsh list ltm virtual command.

Hi nitass, Yes. I ran the command "tmsh list ltm virtual" which showed all the VS of my LTM. But I dont see the attached iRule for all but I could see only for some. However, I could see all the VS with their iRules via GUI. Not sure what I'm missing here.

But I dont see the attached iRule for all but I could see only for some. However, I could see all the VS with their iRules via GUI. can you post example of the virtual server which you see irule in gui but tmsh here?

"tmsh list ltm virtual" not showing the attached iRules

13 Replies

nitass
Employee
Mar 06, 2016
I dont see the attached iRules to a VS when I run the command "tmsh list ltm virtual"

do you see irule in gui? if it is assigned to virtual server, it should be shown in tmsh list ltm virtual command.
- MSK_222682
  Nimbostratus
  Mar 06, 2016
  Hi nitass, Yes. I ran the command "tmsh list ltm virtual" which showed all the VS of my LTM. But I dont see the attached iRule for all but I could see only for some. However, I could see all the VS with their iRules via GUI. Not sure what I'm missing here.
nitass_89166
Noctilucent
Mar 06, 2016
I dont see the attached iRules to a VS when I run the command "tmsh list ltm virtual"

do you see irule in gui? if it is assigned to virtual server, it should be shown in tmsh list ltm virtual command.
- MSK_222682
  Nimbostratus
  Mar 06, 2016
  Hi nitass, Yes. I ran the command "tmsh list ltm virtual" which showed all the VS of my LTM. But I dont see the attached iRule for all but I could see only for some. However, I could see all the VS with their iRules via GUI. Not sure what I'm missing here.
nitass
Employee
Mar 06, 2016
But I dont see the attached iRule for all but I could see only for some. However, I could see all the VS with their iRules via GUI.

can you post example of the virtual server which you see irule in gui but tmsh here?
- MSK_222682
  Nimbostratus
  Mar 06, 2016
  Hi nitass, I have pasted the results
nitass_89166
Noctilucent
Mar 06, 2016
But I dont see the attached iRule for all but I could see only for some. However, I could see all the VS with their iRules via GUI.

can you post example of the virtual server which you see irule in gui but tmsh here?
- MSK_222682
  Nimbostratus
  Mar 06, 2016
  Hi nitass, I have pasted the results
MSK_222682
Nimbostratus
Mar 06, 2016
ltm virtual vs_esolutions.dhl.com_9011 { connection-limit 2000 destination 156.137.1.52:https ip-protocol tcp mask 255.255.255.255 persist { pr_pers_cookie1hr { default yes } } pool pl_esolutions.dhl.com_9011 profiles { http { } pr_sslcli-esolutions.dhl.com-g3 { context clientside } tcp { } } source 0.0.0.0/0 source-address-translation { type automap } vs-index 123
nitass_89166
Noctilucent
Mar 06, 2016
I have pasted the results

it is weird. will irule be shown if you re-apply the irule to virtual server?

anyway, if it happens on many virtual servers, i think you had better open a support case.

just my 2c
- MSK_222682
  Nimbostratus
  Mar 07, 2016
  I executed the command again and now I could see the list of LTMs and their iRules as well. Not sure why it did not turn up at the first instance
nitass
Employee
Mar 06, 2016
I have pasted the results

it is weird. will irule be shown if you re-apply the irule to virtual server?

anyway, if it happens on many virtual servers, i think you had better open a support case.

just my 2c
- MSK_222682
  Nimbostratus
  Mar 07, 2016
  I executed the command again and now I could see the list of LTMs and their iRules as well. Not sure why it did not turn up at the first instance