Forum Discussion
NimbostratusSNMP without management interface
Hi all
I have the problem especified in the SOL7530(https://support.f5.com/kb/en-us/solutions/public/7000/500/sol7530.html)
the management port IP address is typically associated with the system's host name. However, in some cases the management port is not used, or remote SNMP systems reside on an IP network reachable through an interface other than the management port.
I have made the workaround procedure of SOL7530, but it don´t work.
Can anyone help me???
24 Replies
- nitass
Employee
Yes, now the bigip is responding SNMP requests but not properly.
what is not working properly?
Pedro_Maidana_1When i try to add the bigip on the snmp manager (in this case an mrtg) it´s added but all the interface fields are commented. And i can´t see graphs abt traffic. When trying w/ other snmp manager, for example, a free snmp monitor (sol@rw1nds) the software tell me that can connect to Bigip properly. I need to configure the specific OID on the bigip SNMP configuration or can to leave default? (.1)
nitass_89166Noctilucent
I need to configure the specific OID on the bigip SNMP configuration or can to leave default? (.1)
.1 (default) allows all the oid tree.
Fernando_TicianHi guys, I have the same problem, i tried the SOL7530(https://support.f5.com/kb/en-us/solutions/public/7000/500/sol7530.html without sucess. Someone got the solution for this issue? Thanks
- nitass
I need to configure the specific OID on the bigip SNMP configuration or can to leave default? (.1)
.1 (default) allows all the oid tree.
- Fernando_TicianHi guys, I have the same problem, i tried the SOL7530(https://support.f5.com/kb/en-us/solutions/public/7000/500/sol7530.html without sucess. Someone got the solution for this issue? Thanks
