Forum Discussion

mundofer_338665's avatar
mundofer_338665
Icon for Nimbostratus rankNimbostratus
Nov 28, 2017
Solved

Shared SNAT and pool in a LTM?

We have a LTM with several virtual servers. All the virtual servers,the destination servers and the SNAT address are in the same IP network 10.220.2.0/23 I have two beginner questions: - Can I have o...
devops
LTM
  • eey0re_68979's avatar
    eey0re_68979
    Nov 28, 2017

    Hi, and welcome. Yes, your SNAT pool can be used by many Virtual Servers - or you could just use 

    SNAT Automap
    on each Virtual Server and not bother configuring a SNAT pool. (The Self IP(s) will be used instead.)

    Pools can be (and often are) used by many different Virtual Servers. There is no need for an iRule to do this.

eey0re_68979's avatar
eey0re_68979
Icon for Altocumulus rankAltocumulus
Nov 28, 2017

Hi, and welcome. Yes, your SNAT pool can be used by many Virtual Servers - or you could just use 

SNAT Automap
on each Virtual Server and not bother configuring a SNAT pool. (The Self IP(s) will be used instead.)

Pools can be (and often are) used by many different Virtual Servers. There is no need for an iRule to do this.

Andy_McGrath's avatar
Andy_McGrath
Icon for Cumulonimbus rankCumulonimbus
Nov 28, 2017

If you use SNAT Automap the F5 will use the floating Self-IP associated with the egress VLAN