Forum Discussion
NimbostratusRouting issue in F5
dEAR all
I have created a wilcard vs for forwarding traffic to the next hop firewall and added specific routes to the firewall
When i try to connect i am getting the below error
I am using partitions and route domains
09:52:49.756192 IP 10.9.2.16.63436 > 83.111.53.84.https: S 1826133608:1826133608(0) win 65535 09:52:52.762548 IP 10.9.2.16.63436 > 83.111.53.84.https: S 1826133608:1826133608(0) win 65535 09:52:55.970551 IP 10.9.2.16.63436 > 83.111.53.84.https: S 1826133608:1826133608(0) win 65535
6 Replies
- nitass
Employee
i think i do not see syn-ack from server.
09:52:49.756192 IP 10.9.2.16.63436 > 83.111.53.84.https: S 1826133608:1826133608(0) win 65535 09:52:52.762548 IP 10.9.2.16.63436 > 83.111.53.84.https: S 1826133608:1826133608(0) win 65535 09:52:55.970551 IP 10.9.2.16.63436 > 83.111.53.84.https: S 1826133608:1826133608(0) win 65535 
Mathew_58740I am using this F5 as router i just wanted to forward traffic to next hop.I am not seeing any traffic matching to Wilcard or forwarding virtual servers .But in tcpdump i can see it is reaching the F5 Interface.
- nitass
I am not seeing any traffic matching to Wilcard or forwarding virtual servers .But in tcpdump i can see it is reaching the F5 Interface.
can you post the virtual server configuration?
tmsh list ltm virtual (name) - Mathew_58740
ltm virtual _VS_C0_FWD_ANY { destination 0.0.0.0:any ip-forward mask 255.255.255.255 partition Customer0 profiles { /Common/fastL4 { } } source 0.0.0.0/0 translate-address disabled translate-port disabled vlans-disabled }
- nitass
mask 255.255.255.255
mask should be "any".
- Mathew_58740
Sorry for that mistake and thank you very much for that its working now.
