Restrict access based off source network

Can you list the contents of the class (using 'b class ips_internal list all') and your client IP address. If you want to anonymise the IP's, just change the first two or three octets.

Here is an example of the default private_net datagroup on a 9.4.8 unit:

 
  b class private_net list all 
 class private_net { 
    type ip 
    filename none 
    mode rw 
    partition Common 
    network 10.0.0.0/8 
    network 172.16.0.0/12 
    network 192.168.0.0/16 
    none 
    none 
 } 
  
  
 Thanks, 
 Aaron