F5 is upgrading its customer support chat feature on My.F5.com. Chat support will be unavailable from 6am-10am PST on 1/20/26. Refer to K000159584 for details.

Forum Discussion

navgup_66025's avatar
navgup_66025
Icon for Nimbostratus rankNimbostratus
Mar 17, 2009

Redundant LTM3600 pair on different subnets

Currently, I am using LTM 3600 in a redundant pair (active/standby mode) inside the company's network. No traffic is coming from outside. Both units are configured under the same subnet1.   ...
config
design
L4L7_53191's avatar
L4L7_53191
Icon for Nimbostratus rankNimbostratus
Apr 13, 2009
Network fail over can be used for large layer 2 spanned networks (between two sites, for example), for environments where the distance between the BigIPs is too far for the serial fail over cable (e.g. a data center with "a" and "b" cabinets physically separated), or for scenarios where you want two fail over mechanisms. All of this is predicated upon the same network block being configured on the systems.

 

 

I agree with Denny: GTM is the best solution here.

 

 

Regards,

 

Matt