Forum Discussion
navgup_66025
Nimbostratus
NimbostratusRedundant LTM3600 pair on different subnets
Currently, I am using LTM 3600 in a redundant pair (active/standby mode) inside the company's network. No traffic is coming from outside. Both units are configured under the same subnet1.
...
The_BhattmanNimbostratus
NimbostratusThe only way to set it up is via the GUI.
Here is the following criteria for setting up HA (Basic setup)
1. You need to connect the 2 LTMs via Serial Cable (Special one provided by F5.).
2. Create a VLAN and create a self-address on each
Example:
BIGIP1
- VLAN Internal
- Self Address: 192.168.1.2
- Floating Address: 192.168.1.1
- VLAN External
- Self Address: 192.168.2.2
- Floating Address: 192.168.2.1
BIGIP1
- VLAN Internal
- Self Address: 192.168.1.3
- Floating Address: 192.168.1.1
- VLAN External
- Self Address: 192.168.2.3
- Floating Address: 192.168.2.1
Hope this helps.
CB
