Radware option correlates to what on the LTM?

i'm trying to determine what option under tcp profiles this would correlate to.

 

 

Radware

 

 

The Remove on Session End mode allows AppDirector to remove entries from the Client Table before Aging Time expires. This mode is used to clear entries representing the TCP sessions closed before the end of the Aging Time.

 

AppDirector keeps track of the number of users attached to each server using the Client Table. This information is important when using the “least amount of users” dispatch method. AppDirector enhances server statistics by decreasing the number of users once a FIN or RST is detected.

 

The Remove on Session End mode operates like the Entry Per Sessions mode or server per session mode, except:

 

• AppDirector marks the entry for deletion from the Client Table when it detects a RST or FIN

 

packet between server and client, as the RST/FIN packets indicate that the session is closed.

 

• The entry is aged in five seconds and subsequently removed.

 

• For SIP/UDP traffic, AppDirector checks the SIP messages for the BYE or CANCEL command and applies the rapid Client Table entry aging mechanism when such a command is detected. The rapid aging period for SIP connections can be defined via the SIP Aging on Session End parameter. The default, according to SIP standard, is 32 seconds.