Proxy Setting in F5

Hi,

BugID:

When licensing through a proxy, setting the db variables for proxy.host, proxy.port, etc., has no effect.

https://cdn.f5.com/product/bugtracker/ID714626.html

So I suppose that if you follow this kb could enable license trough proxy:

https://support.f5.com/csp/article/K10942531

1. Log in to tmsh by typing the following command:
2. tmsh
3. Set the destination proxy server by using the following command syntax :
4. modify /sys db proxy.host value <hostname>
5. Note: In this command syntax, <hostname> is the destination proxy host name.
6. Set the destination proxy server port by using the following command syntax:
7. modify /sys db proxy.port value <port>
8. Note: In this command syntax, <port> is the numeric port value of your proxy host.
9. Set the destination proxy server protocol by using the following command syntax:
10. modify /sys db proxy.protocol value <protocol>
11. Note: In this command syntax, <protocol> is http or https.
12. To set the destination proxy server username, use the following command syntax:
13. modify /sys db proxy.username value <username>
14. Note: In this command syntax, <username> is the username for authentication to the proxy server.
15. To set the destination proxy server username password, use the following command syntax:
16. modify /sys db proxy.password value <password>
17. Note: In this command syntax, <password> is the username password when authenticating to the proxy server.
18. Exit tmsh by typing the following command:
19. quit

regards