Forum Discussion
CirrusProblème pool
Hello,
A virtual IP address 10.10.10.218 is configured to listen on port 443. This IP redirects traffic to a server with the address 10.10.10.214. When I configured my Virtual Server (VS) to point to the IP address 10.10.10.218, the VS turned red (pool down).
To me it seems as though your pool member is failing the health monitor. You should be able to use a tcpdump on the F5 CLI to see what exactly is causing the failure if the pool member isn't showing you the reason in the GUI.
3 Replies
- zamroni777
MVP
make sure the firewall in the app server and in-between f5 and app server allows the traffic.
unless you canfigure snat pool in the vs, bigip will use self/floating ip to communicate with pool member.
- Paulius
To me it seems as though your pool member is failing the health monitor. You should be able to use a tcpdump on the F5 CLI to see what exactly is causing the failure if the pool member isn't showing you the reason in the GUI.
Abdou76Thank You !
