Forum Discussion
Tom_Butler_1775
Altocumulus
AltocumulusPort Forwarding from VS to Pool
I am attempting to set up a new Virtual Server to listen on and forward to a pool member on port 4002, I have the VS, The Pool, and the member server all green. I can telnet to the member server in ...
We have this resolved. Initially it was necessary to add the new vlans to the port channels used for the f5 to communicate with the balance of the application infrastructure. Once this was accomplished and irule to limit the VS to the specific ports required for application delivery was applied and finally to insure IP persistence through the entire data flow for the application the default gateway for the application servers had to be set to the float ip for the VLAN on the application servers, routing return traffic back through the BigIP.
Tom_Butler_1775Altocumulus
AltocumulusWe have this resolved. Initially it was necessary to add the new vlans to the port channels used for the f5 to communicate with the balance of the application infrastructure. Once this was accomplished and irule to limit the VS to the specific ports required for application delivery was applied and finally to insure IP persistence through the entire data flow for the application the default gateway for the application servers had to be set to the float ip for the VLAN on the application servers, routing return traffic back through the BigIP.