Forum Discussion

kev_245_28249's avatar
kev_245_28249
Icon for Nimbostratus rankNimbostratus
Apr 28, 2011

ping from a route domain

hi,   just wondering, in order to test the routing on a route domain do you ping to the destination with the %id after it?   ie for route domain 13 - ping 10.10.10.10%13  
config
design
Jason_40733's avatar
Jason_40733
Icon for Cirrocumulus rankCirrocumulus

Also, note there is the "rdsh" command in 11.x. This sets a unix shell from the cli that then uses the route domain normally.

e.g.

rdsh 1105
ping 10.10.10.10
 PING 10.10.10.10 (10.10.10.10) 56(84) bytes of data.
64 bytes from 10.10.10.10: icmp_seq=1 ttl=255 time=2.20 ms
64 bytes from 10.10.10.10: icmp_seq=2 ttl=255 time=0.975 ms
 telnet 10.10.10.10 890
Trying 10.10.10.10...
Connected to 10.10.10.10 (10.10.10.10).
Escape character is '^]'.
^]
telnet> quit
Connection closed.
kev_245_28249's avatar
kev_245_28249
Icon for Nimbostratus rankNimbostratus
Apr 22, 2014
really hoping 'rdsh' introduces a cmd prompt change, so you can tell when you are not in rdsh 0. Have given F5 this feedback. Its annoying because certain commands won't work until you jump back into rdsh 0, which can lead one to researching the command etc only to remember to jump back into rdsh 0.