Forum Discussion
rosarra
Altocumulus
AltocumulusPersitence via Xfor
Hello, I have a problem with the balancing of some systems. In the diagram below you can see the current balancer configuration. Internet --> FrontEndF5 --> SecureProxy --> BackEndF5 --> Ohs-Pool --...
Hello,
You seem to be using the article https://support.f5.com/csp/article/K7392 but you have not added the "exists" keyword. Also take a look at https://community.f5.com/t5/technical-forum/enable-source-ip-persistence-based-on-x-forwarded-ip-info/td-p/98748 as many people had the same idea.
I will also suggest if you still see issues to try adding One Connect profile under the VIP as described in https://support.f5.com/csp/article/K7964 and also test CARP persistance if needed https://support.f5.com/csp/article/K11362 .
rosarraAltocumulus
AltocumulusThank you Nikoolayy for your prompt reply.
I've modified the iRule and now seems to work better. But now I often receive the Page expired message. Could be that I've to enable the OneConnect Profile?
Thank you again.
JRahm
Admin
AdminThe last paragraph in my article on oneconnect in relation to HTTP:
"Without OneConnect on a virtual server with HTTP, you will find that persistence data does not appear to be honored. This is because by default, the BIG-IP system performs load balancing for each tcp connection, not each HTTP request, so further requests on the same client-side connection will follow suit from the original decision. By applying OneConnect to the virtual, you effectively detach the server-side from the client-side connection after each request, forcing a new load balancing decision and using persistence information if it available."
I also have a lightboard lesson on oneconnect, hope this helps...