Forum Discussion
woliver_163458
Altocumulus
AltocumulusNo traffic going to pool, but works with different name
I'm seeing an odd issue on our LTM where traffic will not flow to one of my pools. It's inside an irule, but the issue isn't with the rule itself. In a bit of desperation, I created a new pool whic...
Just in case anyone else runs into the same issue, the problem wound up being we had pools in different partitions/route domains with the same name, i.e. 'DP_REST_FIREWALL_Servers', which confuses the device if the partition is not explicitly called out. So the fix was just a matter of updating the irule to read
pool /D04TS/DP_REST_FIREWALL_Servers
instead of
pool DP_REST_FIREWALL_Servers
woliver_163458Altocumulus
AltocumulusJust in case anyone else runs into the same issue, the problem wound up being we had pools in different partitions/route domains with the same name, i.e. 'DP_REST_FIREWALL_Servers', which confuses the device if the partition is not explicitly called out. So the fix was just a matter of updating the irule to read
pool /D04TS/DP_REST_FIREWALL_Servers
instead of
pool DP_REST_FIREWALL_Servers