Forum Discussion

FAJUMO's avatar
FAJUMO
Icon for Cirrus rankCirrus
Jul 18, 2023

Multiple Port Load Balancing

We have 3 IPS load Balanced with 2 ports 192.168.1.20 port 8080 192.168.1.21 port 8080 192.168.1.22 port 8080 VS 192.168.20.211 port 8080   192.168.1.20 port 7080 192.168.1.21 port 7080 192.1...
application delivery
  • Paulius's avatar
    Paulius
    Jul 19, 2023

    FAJUMO I don't believe it can be included in the DNS response but in order to use both 8080 and 7080 you would need to have the following.

    http://192.168.20.211:8080/UniCAPAdmin/layout# 

    http://192.168.20.211:7080/UniCAPAdmin/layout# 

    You could configure an 80 virtual server that balances to both the 8080 and 7080 and then an iRule on each one that performs a redirect to 8080 or 7080 depending on which virtual server you end up being balanced to in the pool for the 80 virtual server.

FAJUMO's avatar
FAJUMO
Icon for Cirrus rankCirrus

Hello  ,Thanks for the swift response.

Both VS were configured  correctly.

This is the scenerio

There is a FQDN for his VS, where users access e.g

http://192.168.20.211/UniCAPAdmin/layout#

It was noticed that when browsed, it is only going to port 8080 alone and not getting to  other port 7080

They want it to be balanced among the instances (port 8080 and port 7080)

Paulius

Paulius's avatar
Paulius
Icon for MVP rankMVP
Jul 19, 2023

FAJUMO I don't believe it can be included in the DNS response but in order to use both 8080 and 7080 you would need to have the following.

http://192.168.20.211:8080/UniCAPAdmin/layout# 

http://192.168.20.211:7080/UniCAPAdmin/layout# 

You could configure an 80 virtual server that balances to both the 8080 and 7080 and then an iRule on each one that performs a redirect to 8080 or 7080 depending on which virtual server you end up being balanced to in the pool for the 80 virtual server.