Forum Discussion
Management Interface Issues
I have 3 interfaces configured. MGT Interface; an Internal Interface and a public interface. My MGT interface is on a seperate network. Yet, I don't think certain traffic is going out of it in response to SNMP queries. I think I've configured my system incorrectly and the SNMP response traffic is not going out the proper interface. So, my first question is can I create a static route using an interface, (the mgt interface), instead of a GW?
IF not here is how I have things config. Does anyone agree that I need to change my default ROUTE default inet -- GATEWAY 138.40.40.1 static (Which is my public route); to: use the MGT INT and any other routes are configured manually?
[admin@f5apm-02:Active] ~ bigpipe mgmt route show
MGMT ROUTE default inet
| GATEWAY 20.20.20.1 MTU 1500
********************************************************************
[admin@f5apm-02:Active] ~ bigpipe route show
ROUTE default inet
| GATEWAY 138.40.40.1 static
ROUTE 138.40.40.0/24
| VLAN Public connected
ROUTE 127.1.1.0/24
| VLAN tmm0 connected
ROUTE 127.10.0.0/16
| VLAN tmm_bp connected
ROUTE any%1
| GATEWAY 10.30.30.1 static
ROUTE 10.30.30.1/29
| VLAN Local connected
ROUTE fe80::/64
| VLAN tmm0 connected
ROUTE fe80::%vlan4093/64
| VLAN Local connected
ROUTE fe80::%vlan4094/64
| VLAN Public connected
ROUTE fe80::%vlan4095/64
| VLAN tmm_bp connected
ROUTE ff02::/64
| VLAN tmm0 auto
ROUTE ff02::%vlan4093/64
| VLAN Local auto
ROUTE ff02::%vlan4094/64
| VLAN Public auto
ROUTE ff02::%vlan4095/64
| VLAN tmm_bp auto
*****************************************************************
- nitassEmployeemy first question is can I create a static route using an interface, (the mgt interface), instead of a GW? is this what you are asking?
Recent Discussions
Related Content
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com