Mail Zimbar behind F5 have problem port 995

can you post the virtual server configuration?

Hi

 

my config virtual as:

 

ltm virtual Mail_POP3SSL_FPT1 {

 

destination 118.69.x.x:pop3s

 

ip-protocol tcp

 

mask 255.255.255.255

 

persist {

 

source_addr {

 

default yes

 

}

 

}

 

pool Server_10.0.25.91_995

 

profiles {

 

tcp { }

 

}

 

snat automap

 

vlans {

 

FPT_LL1

 

}

 

vlans-enabled

 

}

 

 

pls help me

 

thanks

 

What version of Outlook please?

A few Google's suggest this is either an Outlook or AV software issue;

 

 

http://www.zimbra.com/forums/users/43094-solved-outlook-2007-account-setup.html

 

http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/in-outlook-2010-i-receive-error-report-0x800ccc1a/74f2a191-69db-4ad2-8a48-a73fd2250d85

 

 

As the first article suggests, switching to IMAP (whether it solves this issue or not, although I think it will) is probably your best course of action for many reasons.

Hi all

 

I had check , the users from internet access mail via outlook with port 995 work fine , Only Users inside access mail port 995 then some time get this errors .

 

My config virtual for traffic outbound :

 

ltm virtual Mail_Server_Port995 {

 

destination 0.0.0.0:pop3s

 

ip-protocol tcp

 

mask any

 

persist {

 

dest_addr {

 

default yes

 

}

 

}

 

pool Default_Gateway_Mail_Server

 

profiles {

 

tcp { }

 

}

 

rules {

 

Source_MailServer

 

}

 

translate-address disabled

 

vlans {

 

Internal

 

}

 

vlans-enabled

 

}

 

the Defaul_Gateway_Mail_Server have 2 member ip public internet

 

the rules Source_MailServer :

 

when CLIENT_ACCEPTED {

 

if { [IP::addr [IP::client_addr] equals 10.0.25.91] } {

 

snatpool Mail_Server

 

}

 

else

 

{

 

snatpool Nat_Internet_live

 

}

 

}

 

the Ip 10.0.25.91 ip address of mail server

 

the snatpool Mail_Server have 2 ip mx record

 

snatpool Nat_Internet_live have 2 ip public internet

 

 

pls help me

 

thanks all

 

are you able to capture packet while getting an error?

 

 

tcpdump -nni 0.0:nnn -s0 -w /var/tmp/output.pcap host x.x.x.x

 

x.x.x.x is mail server ip which user inside connects to

 

 

please also note client ip and source port number. it might be useful when checking the capture file.

 

 

hope this helps.

hi all

 

when i change type vs from standard to performance then work fine

 

thanks

 

 

Interesting. Thanks for letting us know.

Hi Hung,

 

May be you were using the AVR in the Standard VS???? if yes try it after removing the AVR and see if it works.

 

 

Regards,