Forum Discussion

Steve_M__153836's avatar
Steve_M__153836
Icon for Nimbostratus rankNimbostratus
Jun 09, 2014

Looking for Feedback on Configuring Network Mirroring/Failover for LTM v10.2.2

I have a pair of 3600s that are connected via serial cable and also have a directly connected network connection. Below is the current status of each of the High Availability features and what they u...
application delivery
availability
deployment
LTM
TMOS
v10.2.2
  • nitass_89166's avatar
    nitass_89166
    Jun 10, 2014

    I just wasn't sure if there was any reasons/thoughts on if it should be kept or removed.

     

    i prefer keeping it because, as in askf5 sol, it provides faster failover response time.

     

    Also wanted to make sure I was setting up the configuration correctly.

     

    it looks okay to me. anyway, if you want, you may also add tmm self ip (in addition to mgmt ip) to network failover configuration.

     

nitass_89166's avatar
nitass_89166
Icon for Noctilucent rankNoctilucent

Any reason to leave the serial cable in place or should I go this route?

 

you can keep both (hardware and network), can't you?

 

Steve_M__153836's avatar
Steve_M__153836
Icon for Nimbostratus rankNimbostratus
Jun 10, 2014
Yes I think you can keep both. This SOL (http://support.f5.com/kb/en-us/solutions/public/2000/300/sol2397.html?sr=34012910) describes the differences and it looks like if you use both then even if the network failover indicates it should fail over, it will not unless the hardware failover is also indicating a failover needs to take place. I just wasn't sure if there was any reasons/thoughts on if it should be kept or removed. Also wanted to make sure I was setting up the configuration correctly.